sqlite-amalgamation-3410000.zip

git-svn-id: https://www.unprompted.com/svn/projects/tildefriends/trunk@4196 ed5197a5-7fde-0310-b194-c3ffbd925b24

deps/sqlite/sqlite3.h

@@ -146,9 +146,9 @@ extern "C" {
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.40.1"
+#define SQLITE_VERSION        "3.41.0"
-#define SQLITE_VERSION_NUMBER 3040001
+#define SQLITE_VERSION_NUMBER 3041000
-#define SQLITE_SOURCE_ID      "2022-12-28 14:03:47 df5c253c0b3dd24916e4ec7cf77d3db5294cc9fd45ae7b9c5e82ad8197f38a24"
+#define SQLITE_SOURCE_ID      "2023-02-21 18:09:37 05941c2a04037fc3ed2ffae11f5d2260706f89431f463518740f72ada350866d"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
@@ -563,6 +563,7 @@ SQLITE_API int sqlite3_exec(
 #define SQLITE_CONSTRAINT_DATATYPE     (SQLITE_CONSTRAINT |(12<<8))
 #define SQLITE_NOTICE_RECOVER_WAL      (SQLITE_NOTICE | (1<<8))
 #define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8))
+#define SQLITE_NOTICE_RBU              (SQLITE_NOTICE | (3<<8))
 #define SQLITE_WARNING_AUTOINDEX       (SQLITE_WARNING | (1<<8))
 #define SQLITE_AUTH_USER               (SQLITE_AUTH | (1<<8))
 #define SQLITE_OK_LOAD_PERMANENTLY     (SQLITE_OK | (1<<8))
@@ -1175,7 +1176,6 @@ struct sqlite3_io_methods {
 ** in wal mode after the client has finished copying pages from the wal
 ** file to the database file, but before the *-shm file is updated to
 ** record the fact that the pages have been checkpointed.
-** </ul>
 **
 ** <li>[[SQLITE_FCNTL_EXTERNAL_READER]]
 ** The EXPERIMENTAL [SQLITE_FCNTL_EXTERNAL_READER] opcode is used to detect
@@ -1188,16 +1188,16 @@ struct sqlite3_io_methods {
 ** the database is not a wal-mode db, or if there is no such connection in any
 ** other process. This opcode cannot be used to detect transactions opened
 ** by clients within the current process, only within other processes.
-** </ul>
 **
 ** <li>[[SQLITE_FCNTL_CKSM_FILE]]
-** Used by the cksmvfs VFS module only.
+** The [SQLITE_FCNTL_CKSM_FILE] opcode is for use interally by the
+** [checksum VFS shim] only.
 **
 ** <li>[[SQLITE_FCNTL_RESET_CACHE]]
 ** If there is currently no transaction open on the database, and the
-** database is not a temp db, then this file-control purges the contents
+** database is not a temp db, then the [SQLITE_FCNTL_RESET_CACHE] file-control
-** of the in-memory page cache. If there is an open transaction, or if
+** purges the contents of the in-memory page cache. If there is an open
-** the db is a temp-db, it is a no-op, not an error.
+** transaction, or if the db is a temp-db, this opcode is a no-op, not an error.
 ** </ul>
 */
 #define SQLITE_FCNTL_LOCKSTATE               1
@@ -2184,7 +2184,7 @@ struct sqlite3_mem_methods {
 ** configuration for a database connection can only be changed when that
 ** connection is not currently using lookaside memory, or in other words
 ** when the "current value" returned by
-** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero.
+** [sqlite3_db_status](D,[SQLITE_DBSTATUS_LOOKASIDE_USED],...) is zero.
 ** Any attempt to change the lookaside memory configuration when lookaside
 ** memory is in use leaves the configuration unchanged and returns
 ** [SQLITE_BUSY].)^</dd>
@@ -2334,8 +2334,12 @@ struct sqlite3_mem_methods {
 ** <li> sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 0, 0);
 ** </ol>
 ** Because resetting a database is destructive and irreversible, the
-** process requires the use of this obscure API and multiple steps to help
+** process requires the use of this obscure API and multiple steps to
-** ensure that it does not happen by accident.
+** help ensure that it does not happen by accident. Because this
+** feature must be capable of resetting corrupt databases, and
+** shutting down virtual tables may require access to that corrupt
+** storage, the library must abandon any installed virtual tables
+** without calling their xDestroy() methods.
 **
 ** [[SQLITE_DBCONFIG_DEFENSIVE]] <dt>SQLITE_DBCONFIG_DEFENSIVE</dt>
 ** <dd>The SQLITE_DBCONFIG_DEFENSIVE option activates or deactivates the
@@ -2674,8 +2678,12 @@ SQLITE_API sqlite3_int64 sqlite3_total_changes64(sqlite3*);
 ** ^A call to sqlite3_interrupt(D) that occurs when there are no running
 ** SQL statements is a no-op and has no effect on SQL statements
 ** that are started after the sqlite3_interrupt() call returns.
+**
+** ^The [sqlite3_is_interrupted(D)] interface can be used to determine whether
+** or not an interrupt is currently in effect for [database connection] D.
 */
 SQLITE_API void sqlite3_interrupt(sqlite3*);
+SQLITE_API int sqlite3_is_interrupted(sqlite3*);
 
 /*
 ** CAPI3REF: Determine If An SQL Statement Is Complete
@@ -3293,8 +3301,8 @@ SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
 ** <dd>^An SQLITE_TRACE_PROFILE callback provides approximately the same
 ** information as is provided by the [sqlite3_profile()] callback.
 ** ^The P argument is a pointer to the [prepared statement] and the
-** X argument points to a 64-bit integer which is the estimated of
+** X argument points to a 64-bit integer which is approximately
-** the number of nanosecond that the prepared statement took to run.
+** the number of nanoseconds that the prepared statement took to run.
 ** ^The SQLITE_TRACE_PROFILE callback is invoked when the statement finishes.
 **
 ** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt>
@@ -3357,7 +3365,7 @@ SQLITE_API int sqlite3_trace_v2(
 **
 ** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback
 ** function X to be invoked periodically during long running calls to
-** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for
+** [sqlite3_step()] and [sqlite3_prepare()] and similar for
 ** database connection D.  An example use for this
 ** interface is to keep a GUI updated during a large query.
 **
@@ -3382,6 +3390,13 @@ SQLITE_API int sqlite3_trace_v2(
 ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
 ** database connections for the meaning of "modify" in this paragraph.
 **
+** The progress handler callback would originally only be invoked from the
+** bytecode engine.  It still might be invoked during [sqlite3_prepare()]
+** and similar because those routines might force a reparse of the schema
+** which involves running the bytecode engine.  However, beginning with
+** SQLite version 3.41.0, the progress handler callback might also be
+** invoked directly from [sqlite3_prepare()] while analyzing and generating
+** code for complex queries.
 */
 SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 
@@ -3418,13 +3433,18 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 **
 ** <dl>
 ** ^(<dt>[SQLITE_OPEN_READONLY]</dt>
-** <dd>The database is opened in read-only mode.  If the database does not
+** <dd>The database is opened in read-only mode.  If the database does
-** already exist, an error is returned.</dd>)^
+** not already exist, an error is returned.</dd>)^
 **
 ** ^(<dt>[SQLITE_OPEN_READWRITE]</dt>
-** <dd>The database is opened for reading and writing if possible, or reading
+** <dd>The database is opened for reading and writing if possible, or
-** only if the file is write protected by the operating system.  In either
+** reading only if the file is write protected by the operating
-** case the database must already exist, otherwise an error is returned.</dd>)^
+** system.  In either case the database must already exist, otherwise
+** an error is returned.  For historical reasons, if opening in
+** read-write mode fails due to OS-level permissions, an attempt is
+** made to open it in read-only mode. [sqlite3_db_readonly()] can be
+** used to determine whether the database is actually
+** read-write.</dd>)^
 **
 ** ^(<dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt>
 ** <dd>The database is opened for reading and writing, and is created if
@@ -5405,10 +5425,21 @@ SQLITE_API int sqlite3_create_window_function(
 ** from top-level SQL, and cannot be used in VIEWs or TRIGGERs nor in
 ** schema structures such as [CHECK constraints], [DEFAULT clauses],
 ** [expression indexes], [partial indexes], or [generated columns].
-** The SQLITE_DIRECTONLY flags is a security feature which is recommended
+** <p>
-** for all [application-defined SQL functions], and especially for functions
+** The SQLITE_DIRECTONLY flag is recommended for any
-** that have side-effects or that could potentially leak sensitive
+** [application-defined SQL function]
-** information.
+** that has side-effects or that could potentially leak sensitive information.
+** This will prevent attacks in which an application is tricked
+** into using a database file that has had its schema surreptiously
+** modified to invoke the application-defined function in ways that are
+** harmful.
+** <p>
+** Some people say it is good practice to set SQLITE_DIRECTONLY on all
+** [application-defined SQL functions], regardless of whether or not they
+** are security sensitive, as doing so prevents those functions from being used
+** inside of the database schema, and thus ensures that the database
+** can be inspected and modified using generic tools (such as the [CLI])
+** that do not have access to the application-defined functions.
 ** </dd>
 **
 ** [[SQLITE_INNOCUOUS]] <dt>SQLITE_INNOCUOUS</dt><dd>
@@ -5549,16 +5580,6 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6
 ** then the conversion is performed.  Otherwise no conversion occurs.
 ** The [SQLITE_INTEGER | datatype] after conversion is returned.)^
 **
-** ^(The sqlite3_value_encoding(X) interface returns one of [SQLITE_UTF8],
-** [SQLITE_UTF16BE], or [SQLITE_UTF16LE] according to the current encoding
-** of the value X, assuming that X has type TEXT.)^  If sqlite3_value_type(X)
-** returns something other than SQLITE_TEXT, then the return value from
-** sqlite3_value_encoding(X) is meaningless.  ^Calls to
-** sqlite3_value_text(X), sqlite3_value_text16(X), sqlite3_value_text16be(X),
-** sqlite3_value_text16le(X), sqlite3_value_bytes(X), or
-** sqlite3_value_bytes16(X) might change the encoding of the value X and
-** thus change the return from subsequent calls to sqlite3_value_encoding(X).
-**
 ** ^Within the [xUpdate] method of a [virtual table], the
 ** sqlite3_value_nochange(X) interface returns true if and only if
 ** the column corresponding to X is unchanged by the UPDATE operation
@@ -5623,6 +5644,27 @@ SQLITE_API int sqlite3_value_type(sqlite3_value*);
 SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
 SQLITE_API int sqlite3_value_nochange(sqlite3_value*);
 SQLITE_API int sqlite3_value_frombind(sqlite3_value*);
+
+/*
+** CAPI3REF: Report the internal text encoding state of an sqlite3_value object
+** METHOD: sqlite3_value
+**
+** ^(The sqlite3_value_encoding(X) interface returns one of [SQLITE_UTF8],
+** [SQLITE_UTF16BE], or [SQLITE_UTF16LE] according to the current text encoding
+** of the value X, assuming that X has type TEXT.)^  If sqlite3_value_type(X)
+** returns something other than SQLITE_TEXT, then the return value from
+** sqlite3_value_encoding(X) is meaningless.  ^Calls to
+** [sqlite3_value_text(X)], [sqlite3_value_text16(X)], [sqlite3_value_text16be(X)],
+** [sqlite3_value_text16le(X)], [sqlite3_value_bytes(X)], or
+** [sqlite3_value_bytes16(X)] might change the encoding of the value X and
+** thus change the return from subsequent calls to sqlite3_value_encoding(X).
+**
+** This routine is intended for used by applications that test and validate
+** the SQLite implementation.  This routine is inquiring about the opaque
+** internal state of an [sqlite3_value] object.  Ordinary applications should
+** not need to know what the internal state of an sqlite3_value object is and
+** hence should not need to use this interface.
+*/
 SQLITE_API int sqlite3_value_encoding(sqlite3_value*);
 
 /*
@@ -7003,15 +7045,6 @@ SQLITE_API int sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));
 */
 SQLITE_API void sqlite3_reset_auto_extension(void);
 
-/*
-** The interface to the virtual-table mechanism is currently considered
-** to be experimental.  The interface might change in incompatible ways.
-** If this is a problem for you, do not use the interface at this time.
-**
-** When the virtual-table mechanism stabilizes, we will declare the
-** interface fixed, support it indefinitely, and remove this comment.
-*/
-
 /*
 ** Structures used by the virtual table interface
 */
@@ -7130,10 +7163,10 @@ struct sqlite3_module {
 ** when the omit flag is true there is no guarantee that the constraint will
 ** not be checked again using byte code.)^
 **
-** ^The idxNum and idxPtr values are recorded and passed into the
+** ^The idxNum and idxStr values are recorded and passed into the
 ** [xFilter] method.
-** ^[sqlite3_free()] is used to free idxPtr if and only if
+** ^[sqlite3_free()] is used to free idxStr if and only if
-** needToFreeIdxPtr is true.
+** needToFreeIdxStr is true.
 **
 ** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in
 ** the correct order to satisfy the ORDER BY clause so that no separate
@@ -7253,7 +7286,7 @@ struct sqlite3_index_info {
 ** the [sqlite3_vtab_collation()] interface.  For most real-world virtual
 ** tables, the collating sequence of constraints does not matter (for example
 ** because the constraints are numeric) and so the sqlite3_vtab_collation()
-** interface is no commonly needed.
+** interface is not commonly needed.
 */
 #define SQLITE_INDEX_CONSTRAINT_EQ          2
 #define SQLITE_INDEX_CONSTRAINT_GT          4
@@ -7412,16 +7445,6 @@ SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
 */
 SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
 
-/*
-** The interface to the virtual-table mechanism defined above (back up
-** to a comment remarkably similar to this one) is currently considered
-** to be experimental.  The interface might change in incompatible ways.
-** If this is a problem for you, do not use the interface at this time.
-**
-** When the virtual-table mechanism stabilizes, we will declare the
-** interface fixed, support it indefinitely, and remove this comment.
-*/
-
 /*
 ** CAPI3REF: A Handle To An Open BLOB
 ** KEYWORDS: {BLOB handle} {BLOB handles}
@@ -9625,7 +9648,7 @@ SQLITE_API int sqlite3_vtab_nochange(sqlite3_context*);
 ** <li><p> Otherwise, "BINARY" is returned.
 ** </ol>
 */
-SQLITE_API SQLITE_EXPERIMENTAL const char *sqlite3_vtab_collation(sqlite3_index_info*,int);
+SQLITE_API const char *sqlite3_vtab_collation(sqlite3_index_info*,int);
 
 /*
 ** CAPI3REF: Determine if a virtual table query is DISTINCT
@@ -9782,21 +9805,20 @@ SQLITE_API int sqlite3_vtab_in(sqlite3_index_info*, int iCons, int bHandle);
 ** is undefined and probably harmful.
 **
 ** The X parameter in a call to sqlite3_vtab_in_first(X,P) or
-** sqlite3_vtab_in_next(X,P) must be one of the parameters to the
+** sqlite3_vtab_in_next(X,P) should be one of the parameters to the
 ** xFilter method which invokes these routines, and specifically
 ** a parameter that was previously selected for all-at-once IN constraint
 ** processing use the [sqlite3_vtab_in()] interface in the
 ** [xBestIndex|xBestIndex method].  ^(If the X parameter is not
 ** an xFilter argument that was selected for all-at-once IN constraint
-** processing, then these routines return [SQLITE_MISUSE])^ or perhaps
+** processing, then these routines return [SQLITE_ERROR].)^
-** exhibit some other undefined or harmful behavior.
 **
 ** ^(Use these routines to access all values on the right-hand side
 ** of the IN constraint using code like the following:
 **
 ** <blockquote><pre>
 ** &nbsp;  for(rc=sqlite3_vtab_in_first(pList, &pVal);
-** &nbsp;      rc==SQLITE_OK && pVal
+** &nbsp;      rc==SQLITE_OK && pVal;
 ** &nbsp;      rc=sqlite3_vtab_in_next(pList, &pVal)
 ** &nbsp;  ){
 ** &nbsp;    // do something with pVal
@@ -9894,6 +9916,10 @@ SQLITE_API int sqlite3_vtab_rhs_value(sqlite3_index_info*, int, sqlite3_value **
 ** managed by the prepared statement S and will be automatically freed when
 ** S is finalized.
 **
+** Not all values are available for all query elements. When a value is
+** not available, the output variable is set to -1 if the value is numeric,
+** or to NULL if it is a string (SQLITE_SCANSTAT_NAME).
+**
 ** <dl>
 ** [[SQLITE_SCANSTAT_NLOOP]] <dt>SQLITE_SCANSTAT_NLOOP</dt>
 ** <dd>^The [sqlite3_int64] variable pointed to by the V parameter will be
@@ -9921,12 +9947,24 @@ SQLITE_API int sqlite3_vtab_rhs_value(sqlite3_index_info*, int, sqlite3_value **
 ** to a zero-terminated UTF-8 string containing the [EXPLAIN QUERY PLAN]
 ** description for the X-th loop.
 **
-** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECT</dt>
+** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECTID</dt>
 ** <dd>^The "int" variable pointed to by the V parameter will be set to the
-** "select-id" for the X-th loop.  The select-id identifies which query or
+** id for the X-th query plan element. The id value is unique within the
-** subquery the loop is part of.  The main query has a select-id of zero.
+** statement. The select-id is the same value as is output in the first
-** The select-id is the same value as is output in the first column
+** column of an [EXPLAIN QUERY PLAN] query.
-** of an [EXPLAIN QUERY PLAN] query.
+**
+** [[SQLITE_SCANSTAT_PARENTID]] <dt>SQLITE_SCANSTAT_PARENTID</dt>
+** <dd>The "int" variable pointed to by the V parameter will be set to the
+** the id of the parent of the current query element, if applicable, or
+** to zero if the query element has no parent. This is the same value as
+** returned in the second column of an [EXPLAIN QUERY PLAN] query.
+**
+** [[SQLITE_SCANSTAT_NCYCLE]] <dt>SQLITE_SCANSTAT_NCYCLE</dt>
+** <dd>The sqlite3_int64 output value is set to the number of cycles,
+** according to the processor time-stamp counter, that elapsed while the
+** query element was being processed. This value is not available for
+** all query elements - if it is unavailable the output variable is
+** set to -1.
 ** </dl>
 */
 #define SQLITE_SCANSTAT_NLOOP    0
@@ -9935,12 +9973,14 @@ SQLITE_API int sqlite3_vtab_rhs_value(sqlite3_index_info*, int, sqlite3_value **
 #define SQLITE_SCANSTAT_NAME     3
 #define SQLITE_SCANSTAT_EXPLAIN  4
 #define SQLITE_SCANSTAT_SELECTID 5
+#define SQLITE_SCANSTAT_PARENTID 6
+#define SQLITE_SCANSTAT_NCYCLE   7
 
 /*
 ** CAPI3REF: Prepared Statement Scan Status
 ** METHOD: sqlite3_stmt
 **
-** This interface returns information about the predicted and measured
+** These interfaces return information about the predicted and measured
 ** performance for pStmt.  Advanced applications can use this
 ** interface to compare the predicted and the measured performance and
 ** issue warnings and/or rerun [ANALYZE] if discrepancies are found.
@@ -9951,19 +9991,25 @@ SQLITE_API int sqlite3_vtab_rhs_value(sqlite3_index_info*, int, sqlite3_value **
 **
 ** The "iScanStatusOp" parameter determines which status information to return.
 ** The "iScanStatusOp" must be one of the [scanstatus options] or the behavior
-** of this interface is undefined.
+** of this interface is undefined. ^The requested measurement is written into
-** ^The requested measurement is written into a variable pointed to by
+** a variable pointed to by the "pOut" parameter.
-** the "pOut" parameter.
-** Parameter "idx" identifies the specific loop to retrieve statistics for.
-** Loops are numbered starting from zero. ^If idx is out of range - less than
-** zero or greater than or equal to the total number of loops used to implement
-** the statement - a non-zero value is returned and the variable that pOut
-** points to is unchanged.
 **
-** ^Statistics might not be available for all loops in all statements. ^In cases
+** The "flags" parameter must be passed a mask of flags. At present only
-** where there exist loops with no available statistics, this function behaves
+** one flag is defined - SQLITE_SCANSTAT_COMPLEX. If SQLITE_SCANSTAT_COMPLEX
-** as if the loop did not exist - it returns non-zero and leave the variable
+** is specified, then status information is available for all elements
-** that pOut points to unchanged.
+** of a query plan that are reported by "EXPLAIN QUERY PLAN" output. If
+** SQLITE_SCANSTAT_COMPLEX is not specified, then only query plan elements
+** that correspond to query loops (the "SCAN..." and "SEARCH..." elements of
+** the EXPLAIN QUERY PLAN output) are available. Invoking API
+** sqlite3_stmt_scanstatus() is equivalent to calling
+** sqlite3_stmt_scanstatus_v2() with a zeroed flags parameter.
+**
+** Parameter "idx" identifies the specific query element to retrieve statistics
+** for. Query elements are numbered starting from zero. A value of -1 may be
+** to query for statistics regarding the entire query. ^If idx is out of range
+** - less than -1 or greater than or equal to the total number of query
+** elements used to implement the statement - a non-zero value is returned and
+** the variable that pOut points to is unchanged.
 **
 ** See also: [sqlite3_stmt_scanstatus_reset()]
 */
@@ -9973,6 +10019,19 @@ SQLITE_API int sqlite3_stmt_scanstatus(
   int iScanStatusOp,        /* Information desired.  SQLITE_SCANSTAT_* */
   void *pOut                /* Result written here */
 );
+SQLITE_API int sqlite3_stmt_scanstatus_v2(
+  sqlite3_stmt *pStmt,      /* Prepared statement for which info desired */
+  int idx,                  /* Index of loop to report on */
+  int iScanStatusOp,        /* Information desired.  SQLITE_SCANSTAT_* */
+  int flags,                /* Mask of flags defined below */
+  void *pOut                /* Result written here */
+);
+
+/*
+** CAPI3REF: Prepared Statement Scan Status
+** KEYWORDS: {scan status flags}
+*/
+#define SQLITE_SCANSTAT_COMPLEX 0x0001
 
 /*
 ** CAPI3REF: Zero Scan-Status Counters
@@ -10063,6 +10122,10 @@ SQLITE_API int sqlite3_db_cacheflush(sqlite3*);
 ** function is not defined for operations on WITHOUT ROWID tables, or for
 ** DELETE operations on rowid tables.
 **
+** ^The sqlite3_preupdate_hook(D,C,P) function returns the P argument from
+** the previous call on the same [database connection] D, or NULL for
+** the first call on D.
+**
 ** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()],
 ** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces
 ** provide additional information about a preupdate event. These routines
@@ -10468,6 +10531,19 @@ SQLITE_API int sqlite3_deserialize(
 # undef double
 #endif
 
+#if defined(__wasi__)
+# undef SQLITE_WASI
+# define SQLITE_WASI 1
+# undef SQLITE_OMIT_WAL
+# define SQLITE_OMIT_WAL 1/* because it requires shared memory APIs */
+# ifndef SQLITE_OMIT_LOAD_EXTENSION
+#  define SQLITE_OMIT_LOAD_EXTENSION
+# endif
+# ifndef SQLITE_THREADSAFE
+#  define SQLITE_THREADSAFE 0
+# endif
+#endif
+
 #ifdef __cplusplus
 }  /* End of the 'extern "C"' block */
 #endif

deps/sqlite/sqlite3ext.h

@@ -359,6 +359,8 @@ struct sqlite3_api_routines {
   const char *(*db_name)(sqlite3*,int);
   /* Version 3.40.0 and later */
   int (*value_encoding)(sqlite3_value*);
+  /* Version 3.41.0 and later */
+  int (*is_interrupted)(sqlite3*);
 };
 
 /*
@@ -685,6 +687,8 @@ typedef int (*sqlite3_loadext_entry)(
 #define sqlite3_db_name                sqlite3_api->db_name
 /* Version 3.40.0 and later */
 #define sqlite3_value_encoding         sqlite3_api->value_encoding
+/* Version 3.41.0 and later */
+#define sqlite3_is_interrupted         sqlite3_api->is_interrupted
 #endif /* !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION) */
 
 #if !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION)