From b37669184a3dc0a7820f27c434c7d6346ff8af08 Mon Sep 17 00:00:00 2001 From: Cory McWilliams Date: Wed, 14 Aug 2024 20:01:21 -0400 Subject: [PATCH] doxygen -u # 1.9.8 --- Doxyfile | 659 ++++++++++++++++++++++++++++++++++++------------------- 1 file changed, 430 insertions(+), 229 deletions(-) diff --git a/Doxyfile b/Doxyfile index 1ce549fb..982cef66 100644 --- a/Doxyfile +++ b/Doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.9.1 +# Doxyfile 1.9.8 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -12,6 +12,16 @@ # For lists, items can also be appended using: # TAG += value [value, ...] # Values that contain spaces should be placed between quotes (\" \"). +# +# Note: +# +# Use doxygen to compare the used configuration file with the template +# configuration file: +# doxygen -x [configFile] +# Use doxygen to compare the used configuration file with the template +# configuration file without replacing the environment variables or CMake type +# replacement variables: +# doxygen -x_noenv [configFile] #--------------------------------------------------------------------------- # Project related configuration options @@ -60,16 +70,28 @@ PROJECT_LOGO = OUTPUT_DIRECTORY = -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096 +# sub-directories (in 2 levels) under the output directory of each output format +# and will distribute the generated files over these directories. Enabling this # option can be useful when feeding doxygen a huge amount of source files, where # putting all generated files in the same directory would otherwise causes -# performance problems for the file system. +# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to +# control the number of sub-directories. # The default value is: NO. CREATE_SUBDIRS = NO +# Controls the number of sub-directories that will be created when +# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every +# level increment doubles the number of directories, resulting in 4096 +# directories at level 8 which is the default and also the maximum value. The +# sub-directories are organized in 2 levels, the first level always has a fixed +# number of 16 directories. +# Minimum value: 0, maximum value: 8, default value: 8. +# This tag requires that the tag CREATE_SUBDIRS is set to YES. + +CREATE_SUBDIRS_LEVEL = 8 + # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII # characters to appear in the names of generated files. If set to NO, non-ASCII # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode @@ -81,26 +103,18 @@ ALLOW_UNICODE_NAMES = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian, +# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English +# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek, +# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with +# English messages), Korean, Korean-en (Korean with English messages), Latvian, +# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, +# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, +# Swedish, Turkish, Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English -# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all generated output in the proper direction. -# Possible values are: None, LTR, RTL and Context. -# The default value is: None. - -OUTPUT_TEXT_DIRECTION = None - # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -258,16 +272,16 @@ TAB_SIZE = 4 # the documentation. An alias has the form: # name=value # For example adding -# "sideeffect=@par Side Effects:\n" +# "sideeffect=@par Side Effects:^^" # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines (in the resulting output). You can put ^^ in the value part of an -# alias to insert a newline as if a physical newline was in the original file. -# When you need a literal { or } or , in the value part of an alias you have to -# escape them by means of a backslash (\), this can lead to conflicts with the -# commands \{ and \} for these it is advised to use the version @{ and @} or use -# a double escape (\\{ and \\}) +# "Side Effects:". Note that you cannot put \n's in the value part of an alias +# to insert newlines (in the resulting output). You can put ^^ in the value part +# of an alias to insert a newline as if a physical newline was in the original +# file. When you need a literal { or } or , in the value part of an alias you +# have to escape them by means of a backslash (\), this can lead to conflicts +# with the commands \{ and \} for these it is advised to use the version @{ and +# @} or use a double escape (\\{ and \\}) ALIASES = @@ -312,8 +326,8 @@ OPTIMIZE_OUTPUT_SLICE = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, JavaScript, -# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL, -# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, +# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: # FortranFree, unknown formatted Fortran: Fortran. In the later case the parser # tries to guess whether the code is fixed or free formatted code, this is the # default for Fortran type files). For instance to make doxygen treat .inc files @@ -349,6 +363,17 @@ MARKDOWN_SUPPORT = YES TOC_INCLUDE_HEADINGS = 5 +# The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to +# generate identifiers for the Markdown headings. Note: Every identifier is +# unique. +# Possible values are: DOXYGEN use a fixed 'autotoc_md' string followed by a +# sequence number starting at 0 and GITHUB use the lower case version of title +# with any whitespace replaced by '-' and punctuation characters removed. +# The default value is: DOXYGEN. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +MARKDOWN_ID_STYLE = DOXYGEN + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -460,19 +485,27 @@ TYPEDEF_HIDES_STRUCT = NO LOOKUP_CACHE_SIZE = 0 -# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use +# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use # during processing. When set to 0 doxygen will based this on the number of # cores available in the system. You can set it explicitly to a value larger # than 0 to get more control over the balance between CPU load and processing # speed. At this moment only the input processing can be done using multiple # threads. Since this is still an experimental feature the default is set to 1, -# which efficively disables parallel processing. Please report any issues you +# which effectively disables parallel processing. Please report any issues you # encounter. Generating dot graphs in parallel is controlled by the # DOT_NUM_THREADS setting. # Minimum value: 0, maximum value: 32, default value: 1. NUM_PROC_THREADS = 1 +# If the TIMESTAMP tag is set different from NO then each generated page will +# contain the date or date and time when the page was generated. Setting this to +# NO can help when comparing the output of multiple runs. +# Possible values are: YES, NO, DATETIME and DATE. +# The default value is: NO. + +TIMESTAMP = NO + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -554,7 +587,8 @@ HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set # to NO, these classes will be included in the various overviews. This option -# has no effect if EXTRACT_ALL is enabled. +# will also hide undocumented C++ concepts if enabled. This option has no effect +# if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = NO @@ -585,14 +619,15 @@ INTERNAL_DOCS = NO # filesystem is case sensitive (i.e. it supports files in the same directory # whose names only differ in casing), the option must be set to YES to properly # deal with such files in case they appear in the input. For filesystems that -# are not case sensitive the option should be be set to NO to properly deal with +# are not case sensitive the option should be set to NO to properly deal with # output files written for symbols that only differ in casing, such as for two # classes, one named CLASS and the other named Class, and to also support # references to files without having to specify the exact matching casing. On # Windows (including Cygwin) and MacOS, users should typically set this option # to NO, whereas on Linux or other Unix flavors it should typically be set to # YES. -# The default value is: system dependent. +# Possible values are: SYSTEM, NO and YES. +# The default value is: SYSTEM. CASE_SENSE_NAMES = YES @@ -610,6 +645,12 @@ HIDE_SCOPE_NAMES = NO HIDE_COMPOUND_REFERENCE= NO +# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class +# will show which file needs to be included to use the class. +# The default value is: YES. + +SHOW_HEADERFILE = YES + # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. @@ -767,7 +808,8 @@ FILE_VERSION_FILTER = # output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. You can # optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. +# will be used as the name of the layout file. See also section "Changing the +# layout of pages" for information. # # Note that if you run doxygen from a directory containing a file called # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE @@ -813,27 +855,50 @@ WARNINGS = YES WARN_IF_UNDOCUMENTED = YES # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. +# potential errors in the documentation, such as documenting some parameters in +# a documented function twice, or documenting parameters that don't exist or +# using markup commands wrongly. # The default value is: YES. WARN_IF_DOC_ERROR = YES +# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete +# function parameter documentation. If set to NO, doxygen will accept that some +# parameters have no documentation without warning. +# The default value is: YES. + +WARN_IF_INCOMPLETE_DOC = YES + # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. If -# EXTRACT_ALL is set to YES then this flag will automatically be disabled. +# value. If set to NO, doxygen will only warn about wrong parameter +# documentation, but not about the absence of documentation. If EXTRACT_ALL is +# set to YES then this flag will automatically be disabled. See also +# WARN_IF_INCOMPLETE_DOC # The default value is: NO. WARN_NO_PARAMDOC = NO +# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, doxygen will warn about +# undocumented enumeration values. If set to NO, doxygen will accept +# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: NO. + +WARN_IF_UNDOC_ENUM_VAL = NO + # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when # a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS # then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but # at the end of the doxygen process doxygen will return with a non-zero status. -# Possible values are: NO, YES and FAIL_ON_WARNINGS. +# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then doxygen behaves +# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined doxygen will not +# write the warning messages in between other messages but write them at the end +# of a run, in case a WARN_LOGFILE is defined the warning messages will be +# besides being in the defined file also be shown at the end of a run, unless +# the WARN_LOGFILE is defined as - i.e. standard output (stdout) in that case +# the behavior will remain as with the setting FAIL_ON_WARNINGS. +# Possible values are: NO, YES, FAIL_ON_WARNINGS and FAIL_ON_WARNINGS_PRINT. # The default value is: NO. WARN_AS_ERROR = NO @@ -844,13 +909,27 @@ WARN_AS_ERROR = NO # and the warning text. Optionally the format may contain $version, which will # be replaced by the version of the file (if it could be obtained via # FILE_VERSION_FILTER) +# See also: WARN_LINE_FORMAT # The default value is: $file:$line: $text. WARN_FORMAT = "$file:$line: $text" +# In the $text part of the WARN_FORMAT command it is possible that a reference +# to a more specific place is given. To make it easier to jump to this place +# (outside of doxygen) the user can define a custom "cut" / "paste" string. +# Example: +# WARN_LINE_FORMAT = "'vi $file +$line'" +# See also: WARN_FORMAT +# The default value is: at line $line of file $file. + +WARN_LINE_FORMAT = "at line $line of file $file" + # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard -# error (stderr). +# error (stderr). In case the file specified cannot be opened for writing the +# warning and error messages are written to standard error. When as file - is +# specified the warning and error messages are written to standard output +# (stdout). WARN_LOGFILE = @@ -871,10 +950,21 @@ INPUT = src/ # libiconv (or the iconv built into libc) for the transcoding. See the libiconv # documentation (see: # https://www.gnu.org/software/libiconv/) for the list of possible encodings. +# See also: INPUT_FILE_ENCODING # The default value is: UTF-8. INPUT_ENCODING = UTF-8 +# This tag can be used to specify the character encoding of the source files +# that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify +# character encoding on a per file pattern basis. Doxygen will compare the file +# name with each pattern and apply the encoding instead of the default +# INPUT_ENCODING) if there is a match. The character encodings are a list of the +# form: pattern=encoding (like *.php=ISO-8859-1). See cfg_input_encoding +# "INPUT_ENCODING" for further information on supported encodings. + +INPUT_FILE_ENCODING = + # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and # *.h) to filter out the source-files in the directories. @@ -886,14 +976,15 @@ INPUT_ENCODING = UTF-8 # Note the list of default checked file patterns might differ from the list of # default file extension mappings. # -# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, -# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, -# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, -# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment), -# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl, -# *.ucf, *.qsf and *.ice. +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cxxm, +# *.cpp, *.cppm, *.c++, *.c++m, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, +# *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.ixx, *.l, *.cs, *.d, *.php, +# *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be +# provided as doxygen C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f18, *.f, *.for, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. -FILE_PATTERNS = *.h *.md +FILE_PATTERNS = *.h \ + *.md # The RECURSIVE tag can be used to specify whether or not subdirectories should # be searched for input files as well. @@ -930,10 +1021,7 @@ EXCLUDE_PATTERNS = # (namespaces, classes, functions, etc.) that should be excluded from the # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories use the pattern */test/* +# ANamespace::AClass, ANamespace::*Test EXCLUDE_SYMBOLS = @@ -978,6 +1066,11 @@ IMAGE_PATH = # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. # +# Note that doxygen will use the data processed and written to standard output +# for further processing, therefore nothing else, like debug statements or used +# commands (so in case of a Windows batch file always use @echo OFF), should be +# written to standard output. +# # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not # properly processed by doxygen. @@ -1019,6 +1112,15 @@ FILTER_SOURCE_PATTERNS = USE_MDFILE_AS_MAINPAGE = +# The Fortran standard specifies that for fixed formatted Fortran code all +# characters from position 72 are to be considered as comment. A common +# extension is to allow longer lines before the automatic comment starts. The +# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can +# be processed before the automatic comment starts. +# Minimum value: 7, maximum value: 10000, default value: 72. + +FORTRAN_COMMENT_AFTER = 72 + #--------------------------------------------------------------------------- # Configuration options related to source browsing #--------------------------------------------------------------------------- @@ -1116,9 +1218,11 @@ VERBATIM_HEADERS = YES CLANG_ASSISTED_PARSING = NO -# If clang assisted parsing is enabled and the CLANG_ADD_INC_PATHS tag is set to -# YES then doxygen will add the directory of each input to the include path. +# If the CLANG_ASSISTED_PARSING tag is set to YES and the CLANG_ADD_INC_PATHS +# tag is set to YES then doxygen will add the directory of each input to the +# include path. # The default value is: YES. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. CLANG_ADD_INC_PATHS = YES @@ -1154,10 +1258,11 @@ CLANG_DATABASE_PATH = ALPHABETICAL_INDEX = YES -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. +# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) +# that should be ignored while generating the index headers. The IGNORE_PREFIX +# tag works for classes, function and member names. The entity will be placed in +# the alphabetical list under the first letter of the entity name that remains +# after removing the prefix. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. IGNORE_PREFIX = @@ -1236,7 +1341,12 @@ HTML_STYLESHEET = # Doxygen will copy the style sheet files to the output directory. # Note: The order of the extra style sheet files is of importance (e.g. the last # style sheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. +# list). +# Note: Since the styling of scrollbars can currently not be overruled in +# Webkit/Chromium, the styling will be left out of the default doxygen.css if +# one or more extra stylesheets have been specified. So if scrollbar +# customization is desired it has to be added explicitly. For an example see the +# documentation. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_STYLESHEET = @@ -1251,9 +1361,22 @@ HTML_EXTRA_STYLESHEET = HTML_EXTRA_FILES = +# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output +# should be rendered with a dark or light theme. +# Possible values are: LIGHT always generate light mode output, DARK always +# generate dark mode output, AUTO_LIGHT automatically set the mode according to +# the user preference, use light mode if no preference is set (the default), +# AUTO_DARK automatically set the mode according to the user preference, use +# dark mode if no preference is set and TOGGLE allow to user to switch between +# light and dark mode via a button. +# The default value is: AUTO_LIGHT. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE = AUTO_LIGHT + # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see +# this color. Hue is specified as an angle on a color-wheel, see # https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. @@ -1263,7 +1386,7 @@ HTML_EXTRA_FILES = HTML_COLORSTYLE_HUE = 220 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A +# in the HTML output. For a value of 0 the output will use gray-scales only. A # value of 255 will produce the most vivid colors. # Minimum value: 0, maximum value: 255, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1281,15 +1404,6 @@ HTML_COLORSTYLE_SAT = 100 HTML_COLORSTYLE_GAMMA = 80 -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting this -# to YES can help to show when doxygen was last run and thus if the -# documentation is up to date. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_TIMESTAMP = NO - # If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML # documentation will contain a main index with vertical navigation menus that # are dynamically created via JavaScript. If disabled, the navigation index will @@ -1309,6 +1423,13 @@ HTML_DYNAMIC_MENUS = YES HTML_DYNAMIC_SECTIONS = NO +# If the HTML_CODE_FOLDING tag is set to YES then classes and functions can be +# dynamically folded and expanded in the generated HTML source code. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_CODE_FOLDING = YES + # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries # shown in the various tree structured indices initially; the user can expand # and collapse entries dynamically later on. Doxygen will expand the tree to @@ -1345,6 +1466,13 @@ GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" +# This tag determines the URL of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDURL = + # This tag specifies a string that should uniquely identify the documentation # set bundle. This should be a reverse domain-name style string, e.g. # com.mycompany.MyDocSet. Doxygen will append .docset to the name. @@ -1370,8 +1498,12 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: -# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows. +# on Windows. In the beginning of 2021 Microsoft took the original page, with +# a.o. the download links, offline the HTML help workshop was already many years +# in maintenance mode). You can download the HTML help workshop from the web +# archives at Installation executable (see: +# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo +# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML @@ -1428,6 +1560,16 @@ BINARY_TOC = NO TOC_EXPAND = NO +# The SITEMAP_URL tag is used to specify the full URL of the place where the +# generated documentation will be placed on the server by the user during the +# deployment of the documentation. The generated sitemap is called sitemap.xml +# and placed on the directory specified by HTML_OUTPUT. In case no SITEMAP_URL +# is specified no sitemap is generated. For information about the sitemap +# protocol see https://www.sitemaps.org +# This tag requires that the tag GENERATE_HTML is set to YES. + +SITEMAP_URL = + # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help @@ -1530,16 +1672,28 @@ DISABLE_INDEX = NO # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. +# further fine tune the look of the index (see "Fine-tuning the output"). As an +# example, the default style sheet generated by doxygen has an example that +# shows how to put an image at the root of the tree instead of the PROJECT_NAME. +# Since the tree basically has the same information as the tab index, you could +# consider setting DISABLE_INDEX to YES when enabling this option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_TREEVIEW = NO +# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the +# FULL_SIDEBAR option determines if the side bar is limited to only the treeview +# area (value NO) or if it should extend to the full height of the window (value +# YES). Setting this to YES gives a layout similar to +# https://docs.readthedocs.io with more room for contents, but less room for the +# project logo, title, and description. If either GENERATE_TREEVIEW or +# DISABLE_INDEX is set to NO, this option has no effect. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FULL_SIDEBAR = NO + # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that # doxygen will group on one line in the generated HTML documentation. # @@ -1564,6 +1718,13 @@ TREEVIEW_WIDTH = 250 EXT_LINKS_IN_WINDOW = NO +# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email +# addresses. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +OBFUSCATE_EMAILS = YES + # If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg # tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see # https://inkscape.org) to generate formulas as SVG images instead of PNGs for @@ -1584,17 +1745,6 @@ HTML_FORMULA_FORMAT = png FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANSPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - # The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands # to create new LaTeX commands to be used in formulas as building blocks. See # the section "Including formulas" for details. @@ -1612,11 +1762,29 @@ FORMULA_MACROFILE = USE_MATHJAX = NO +# With MATHJAX_VERSION it is possible to specify the MathJax version to be used. +# Note that the different versions of MathJax have different requirements with +# regards to the different settings, so it is possible that also other MathJax +# settings have to be changed when switching between the different MathJax +# versions. +# Possible values are: MathJax_2 and MathJax_3. +# The default value is: MathJax_2. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_VERSION = MathJax_2 + # When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. +# the MathJax output. For more details about the output format see MathJax +# version 2 (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3 +# (see: +# http://docs.mathjax.org/en/latest/web/components/output.html). # Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. +# compatibility. This is the name for Mathjax version 2, for MathJax version 3 +# this will be translated into chtml), NativeMML (i.e. MathML. Only supported +# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This +# is the name for Mathjax version 3, for MathJax version 2 this will be +# translated into HTML-CSS) and SVG. # The default value is: HTML-CSS. # This tag requires that the tag USE_MATHJAX is set to YES. @@ -1629,15 +1797,21 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from https://www.mathjax.org before deployment. -# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2. +# MathJax from https://www.mathjax.org before deployment. The default value is: +# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2 +# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3 # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = https://cdn.jsdelivr.net/npm/mathjax@2 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax # extension names that should be enabled during MathJax rendering. For example +# for MathJax version 2 (see +# https://docs.mathjax.org/en/v2.7-latest/tex.html#tex-and-latex-extensions): # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# For example for MathJax version 3 (see +# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html): +# MATHJAX_EXTENSIONS = ams # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_EXTENSIONS = @@ -1817,29 +1991,31 @@ PAPER_TYPE = a4 EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the -# generated LaTeX document. The header should contain everything until the first -# chapter. If it is left blank doxygen will generate a standard header. See -# section "Doxygen usage" for information on how to let doxygen write the -# default header to a separate file. +# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for +# the generated LaTeX document. The header should contain everything until the +# first chapter. If it is left blank doxygen will generate a standard header. It +# is highly recommended to start with a default header using +# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty +# and then modify the file new_header.tex. See also section "Doxygen usage" for +# information on how to generate the default header that doxygen normally uses. # -# Note: Only use a user-defined header if you know what you are doing! The -# following commands have a special meaning inside the header: $title, -# $datetime, $date, $doxygenversion, $projectname, $projectnumber, -# $projectbrief, $projectlogo. Doxygen will replace $title with the empty -# string, for the replacement values of the other commands the user is referred -# to HTML_HEADER. +# Note: Only use a user-defined header if you know what you are doing! +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. The following +# commands have a special meaning inside the header (and footer): For a +# description of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_HEADER = -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the -# generated LaTeX document. The footer should contain everything after the last -# chapter. If it is left blank doxygen will generate a standard footer. See +# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for +# the generated LaTeX document. The footer should contain everything after the +# last chapter. If it is left blank doxygen will generate a standard footer. See # LATEX_HEADER for more information on how to generate a default footer and what -# special commands can be used inside the footer. -# -# Note: Only use a user-defined footer if you know what you are doing! +# special commands can be used inside the footer. See also section "Doxygen +# usage" for information on how to generate the default footer that doxygen +# normally uses. Note: Only use a user-defined footer if you know what you are +# doing! # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_FOOTER = @@ -1882,10 +2058,16 @@ PDF_HYPERLINKS = YES USE_PDFLATEX = YES -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode -# command to the generated LaTeX files. This will instruct LaTeX to keep running -# if errors occur, instead of asking the user for help. This option is also used -# when generating formulas in HTML. +# The LATEX_BATCHMODE tag signals the behavior of LaTeX in case of an error. +# Possible values are: NO same as ERROR_STOP, YES same as BATCH, BATCH In batch +# mode nothing is printed on the terminal, errors are scrolled as if is +# hit at every error; missing files that TeX tries to input or request from +# keyboard input (\read on a not open input stream) cause the job to abort, +# NON_STOP In nonstop mode the diagnostic message will appear on the terminal, +# but there is no possibility of user interaction just like in batch mode, +# SCROLL In scroll mode, TeX will stop only for missing files to input or if +# keyboard input is necessary and ERROR_STOP In errorstop mode, TeX will stop at +# each error, asking for user intervention. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1898,16 +2080,6 @@ LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO -# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source -# code with syntax highlighting in the LaTeX output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_SOURCE_CODE = NO - # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See # https://en.wikipedia.org/wiki/BibTeX and \cite for more info. @@ -1916,14 +2088,6 @@ LATEX_SOURCE_CODE = NO LATEX_BIB_STYLE = plain -# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated -# page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_TIMESTAMP = NO - # The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) # path from which the emoji images will be read. If a relative path is entered, # it will be relative to the LATEX_OUTPUT directory. If left blank the @@ -1988,16 +2152,6 @@ RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = -# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code -# with syntax highlighting in the RTF output. -# -# Note that which sources are shown also depends on other settings such as -# SOURCE_BROWSER. -# The default value is: NO. -# This tag requires that the tag GENERATE_RTF is set to YES. - -RTF_SOURCE_CODE = NO - #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- @@ -2094,27 +2248,44 @@ GENERATE_DOCBOOK = NO DOCBOOK_OUTPUT = docbook -# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the -# program listings (including syntax highlighting and cross-referencing -# information) to the DOCBOOK output. Note that enabling this will significantly -# increase the size of the DOCBOOK output. -# The default value is: NO. -# This tag requires that the tag GENERATE_DOCBOOK is set to YES. - -DOCBOOK_PROGRAMLISTING = NO - #--------------------------------------------------------------------------- # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# AutoGen Definitions (see https://autogen.sourceforge.net/) file that captures # the structure of the code including all documentation. Note that this feature # is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO +#--------------------------------------------------------------------------- +# Configuration options related to Sqlite3 output +#--------------------------------------------------------------------------- + +# If the GENERATE_SQLITE3 tag is set to YES doxygen will generate a Sqlite3 +# database with symbols found by doxygen stored in tables. +# The default value is: NO. + +GENERATE_SQLITE3 = NO + +# The SQLITE3_OUTPUT tag is used to specify where the Sqlite3 database will be +# put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put +# in front of it. +# The default directory is: sqlite3. +# This tag requires that the tag GENERATE_SQLITE3 is set to YES. + +SQLITE3_OUTPUT = sqlite3 + +# The SQLITE3_OVERWRITE_DB tag is set to YES, the existing doxygen_sqlite3.db +# database file will be recreated with each doxygen run. If set to NO, doxygen +# will warn if an a database file is already found and not modify it. +# The default value is: YES. +# This tag requires that the tag GENERATE_SQLITE3 is set to YES. + +SQLITE3_RECREATE_DB = YES + #--------------------------------------------------------------------------- # Configuration options related to the Perl module output #--------------------------------------------------------------------------- @@ -2189,7 +2360,8 @@ SEARCH_INCLUDES = YES # The INCLUDE_PATH tag can be used to specify one or more directories that # contain include files that are not input files but should be processed by the -# preprocessor. +# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of +# RECURSIVE has no effect here. # This tag requires that the tag SEARCH_INCLUDES is set to YES. INCLUDE_PATH = @@ -2256,15 +2428,15 @@ TAGFILES = GENERATE_TAGFILE = -# If the ALLEXTERNALS tag is set to YES, all external class will be listed in -# the class index. If set to NO, only the inherited external classes will be -# listed. +# If the ALLEXTERNALS tag is set to YES, all external classes and namespaces +# will be listed in the class and namespace index. If set to NO, only the +# inherited external classes will be listed. # The default value is: NO. ALLEXTERNALS = NO # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will be +# in the topic index. If set to NO, only the current project's groups will be # listed. # The default value is: YES. @@ -2278,25 +2450,9 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES #--------------------------------------------------------------------------- -# Configuration options related to the dot tool +# Configuration options related to diagram generator tools #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram -# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to -# NO turns the diagrams off. Note that this option also works with HAVE_DOT -# disabled, but it is recommended to install and use dot, since it yields more -# powerful graphs. -# The default value is: YES. - -CLASS_DIAGRAMS = YES - -# You can include diagrams made with dia in doxygen documentation. Doxygen will -# then run dia to produce the diagram and insert it in the documentation. The -# DIA_PATH tag allows you to specify the directory where the dia binary resides. -# If left empty dia is assumed to be found in the default search path. - -DIA_PATH = - # If set to YES the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2305,7 +2461,7 @@ HIDE_UNDOC_RELATIONS = YES # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # available from the path. This tool is part of Graphviz (see: -# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent # Bell Labs. The other options in this section have no effect if this option is # set to NO # The default value is: YES. @@ -2322,49 +2478,73 @@ HAVE_DOT = YES DOT_NUM_THREADS = 0 -# When you want a differently looking font in the dot files that doxygen -# generates you can specify the font name using DOT_FONTNAME. You need to make -# sure dot is able to find the font, which can be done by putting it in a -# standard location or by setting the DOTFONTPATH environment variable or by -# setting DOT_FONTPATH to the directory containing the font. -# The default value is: Helvetica. +# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of +# subgraphs. When you want a differently looking font in the dot files that +# doxygen generates you can specify fontname, fontcolor and fontsize attributes. +# For details please see Node, +# Edge and Graph Attributes specification You need to make sure dot is able +# to find the font, which can be done by putting it in a standard location or by +# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. Default graphviz fontsize is 14. +# The default value is: fontname=Helvetica,fontsize=10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTNAME = Helvetica +DOT_COMMON_ATTR = "fontname=Helvetica,fontsize=10" -# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of -# dot graphs. -# Minimum value: 4, maximum value: 24, default value: 10. +# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can +# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. Complete documentation about +# arrows shapes. +# The default value is: labelfontname=Helvetica,labelfontsize=10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTSIZE = 10 +DOT_EDGE_ATTR = "labelfontname=Helvetica,labelfontsize=10" -# By default doxygen will tell dot to use the default font as specified with -# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set -# the path where dot can find it using this tag. +# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes +# around nodes set 'shape=plain' or 'shape=plaintext' Shapes specification +# The default value is: shape=box,height=0.2,width=0.4. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NODE_ATTR = "shape=box,height=0.2,width=0.4" + +# You can set the path where dot can find font specified with fontname in +# DOT_COMMON_ATTR and others dot attributes. # This tag requires that the tag HAVE_DOT is set to YES. DOT_FONTPATH = -# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for -# each documented class showing the direct and indirect inheritance relations. -# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then doxygen will +# generate a graph for each documented class showing the direct and indirect +# inheritance relations. In case the CLASS_GRAPH tag is set to YES or GRAPH and +# HAVE_DOT is enabled as well, then dot will be used to draw the graph. In case +# the CLASS_GRAPH tag is set to YES and HAVE_DOT is disabled or if the +# CLASS_GRAPH tag is set to BUILTIN, then the built-in generator will be used. +# If the CLASS_GRAPH tag is set to TEXT the direct and indirect inheritance +# relations will be shown as texts / links. +# Possible values are: NO, YES, TEXT, GRAPH and BUILTIN. # The default value is: YES. -# This tag requires that the tag HAVE_DOT is set to YES. CLASS_GRAPH = YES # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a # graph for each documented class showing the direct and indirect implementation # dependencies (inheritance, containment, and class references variables) of the -# class with other documented classes. +# class with other documented classes. Explicit enabling a collaboration graph, +# when COLLABORATION_GRAPH is set to NO, can be accomplished by means of the +# command \collaborationgraph. Disabling a collaboration graph can be +# accomplished by means of the command \hidecollaborationgraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. COLLABORATION_GRAPH = YES # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for -# groups, showing the direct groups dependencies. +# groups, showing the direct groups dependencies. Explicit enabling a group +# dependency graph, when GROUP_GRAPHS is set to NO, can be accomplished by means +# of the command \groupgraph. Disabling a directory graph can be accomplished by +# means of the command \hidegroupgraph. See also the chapter Grouping in the +# manual. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2424,7 +2604,9 @@ TEMPLATE_RELATIONS = NO # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to # YES then doxygen will generate a graph for each documented file showing the # direct and indirect include dependencies of the file with other documented -# files. +# files. Explicit enabling an include graph, when INCLUDE_GRAPH is is set to NO, +# can be accomplished by means of the command \includegraph. Disabling an +# include graph can be accomplished by means of the command \hideincludegraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2433,7 +2615,10 @@ INCLUDE_GRAPH = YES # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are # set to YES then doxygen will generate a graph for each documented file showing # the direct and indirect include dependencies of the file with other documented -# files. +# files. Explicit enabling an included by graph, when INCLUDED_BY_GRAPH is set +# to NO, can be accomplished by means of the command \includedbygraph. Disabling +# an included by graph can be accomplished by means of the command +# \hideincludedbygraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2473,23 +2658,32 @@ GRAPHICAL_HIERARCHY = YES # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the # dependencies a directory has on other directories in a graphical way. The # dependency relations are determined by the #include relations between the -# files in the directories. +# files in the directories. Explicit enabling a directory graph, when +# DIRECTORY_GRAPH is set to NO, can be accomplished by means of the command +# \directorygraph. Disabling a directory graph can be accomplished by means of +# the command \hidedirectorygraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. DIRECTORY_GRAPH = YES +# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels +# of child directories generated in directory dependency graphs by dot. +# Minimum value: 1, maximum value: 25, default value: 1. +# This tag requires that the tag DIRECTORY_GRAPH is set to YES. + +DIR_GRAPH_MAX_DEPTH = 1 + # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. For an explanation of the image formats see the section # output formats in the documentation of the dot tool (Graphviz (see: -# http://www.graphviz.org/)). +# https://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd, -# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo, -# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo, -# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# Possible values are: png, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, +# gif, gif:cairo, gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, +# png:cairo, png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and # png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2521,11 +2715,12 @@ DOT_PATH = DOTFILE_DIRS = -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the \mscfile -# command). +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. -MSCFILE_DIRS = +DIA_PATH = # The DIAFILE_DIRS tag can be used to specify one or more directories that # contain dia files that are included in the documentation (see the \diafile @@ -2534,10 +2729,10 @@ MSCFILE_DIRS = DIAFILE_DIRS = # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the -# path where java can find the plantuml.jar file. If left blank, it is assumed -# PlantUML is not used or called during a preprocessing step. Doxygen will -# generate a warning when it encounters a \startuml command in this case and -# will not generate output for the diagram. +# path where java can find the plantuml.jar file or to the filename of jar file +# to be used. If left blank, it is assumed PlantUML is not used or called during +# a preprocessing step. Doxygen will generate a warning when it encounters a +# \startuml command in this case and will not generate output for the diagram. PLANTUML_JAR_PATH = @@ -2575,18 +2770,6 @@ DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 0 -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not seem -# to support this out of the box. -# -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_TRANSPARENT = NO - # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This # makes dot run faster, but since only newer versions of dot (>1.8.10) support @@ -2599,6 +2782,8 @@ DOT_MULTI_TARGETS = NO # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page # explaining the meaning of the various boxes and arrows in the dot generated # graphs. +# Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal +# graphical representation for inheritance and collaboration diagrams is used. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2607,8 +2792,24 @@ GENERATE_LEGEND = YES # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate # files that are used to generate the various graphs. # -# Note: This setting is not only used for dot files but also for msc and -# plantuml temporary files. +# Note: This setting is not only used for dot files but also for msc temporary +# files. # The default value is: YES. DOT_CLEANUP = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. If the MSCGEN_TOOL tag is left empty (the default), then doxygen will +# use a built-in version of mscgen tool to produce the charts. Alternatively, +# the MSCGEN_TOOL tag can also specify the name an external tool. For instance, +# specifying prog as the value, doxygen will call the tool as prog -T +# -o . The external tool should support +# output file formats "png", "eps", "svg", and "ismap". + +MSCGEN_TOOL = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS =